6 Reasons For Choosing VC100
*Accurate measurement of automotive paint
*Highly-definition Digital LCD Backit for bright picture
*Highly sensitive probe for well measure stability
*Multiple measurement ranges apply to more situations
*Small and light, easy to carry, easy to measure
*Fast shipping and lifetime technical support
Car Paint Tester Introduction
This car paint check meter is a portable obd2 obdii coating thickness gauge,which can meansure the thickness of non-metallic coating(such as paint,film,etc.)
Car Paint Tester Operation Instructions
Open battery cover and load two CR2032 button batteries(Not Includes); Pay attention to positive and negative pole.
Leave the instrument hang in the air and press”CLR”button to turn it on,LCD full screen display,which means it enters the measurement state.Then long press”CLR”button to turn it off.
Note:Keep it away from the substrate when starting up.
Press the probe onto the coated metal substrate lightly,ensure that the instrument should be perpendicular to the surface of the object that being measured.
Note:When the probe was pressed on the substrate,the LCD will display”—“,then you must wait unit the measurement value displayed the LCD,then remove it from the substrate.If removing before a value is displayed,it will display the last measured value.
After start-up,short press”UNIT”button to select measurement unit mm or mil.
After start-up,long press”UNIT”button to turn on/off the backlight.
6.Clear screen data
After start-up,press”CLR”button to clear the data displayed on LCD screen.
7.Power off automatically
The Car Paint Tester will power off automatically if two minutes no operation after start-up.And it will power off automatically as well after five minutes start-up,even when you are operating it.
There are no reviews yet.